16
N415-0576CE-GB-DE AUG 06.20
Problem Possible Causes Soluon
peeling inside lid or hood.
Grease build-up on inside
surfaces.
lid and hood is porcelain, and will
not peel. The peeling is caused by
hardened grease, which dries into
cleaning will prevent this. See cleaning
(Rumbling noise and
burner surface.)
Lack of gas.
Supply hose is pinched.
venturi tube.
Check gas level in propane cylinder.
Clean out venturi tube.
burner abruptly makes
blow-torch type sound
and grows dim.)
grease drippings and build-up.
Ports are clogged.
Burner overheated due to
much grill surface covered by
griddle or pan.)
Leaking gasket surrounding the
the burner housing.
least two minutes. Relight burner and
red.
grill surface is covered by objects or
to cool for at least two minutes, then
relight.
Allow burner to cool and inspect
are found, contact your authorized
Napoleon dealer to order a replacement
burner assembly.
Contact your authorized Napoleon
replacement burner assembly.
To Next Page
Loading...
Need help?
General