© National Instruments | 3-1
3
Connector and LED
Information
The
I/O Connector Signal Descriptions and +5 V Power Source sections contain information
about X Series connector signals and power. Refer to Appendix A,
Device-Specific Information,
for device I/O connector pinouts.
The
PCI Express Device Disk Drive Power Connector and RTSI Connector Pinout sections refer
to X Series PCI Express device power and the RTSI connector on PCI Express devices.
The
USB Device LED Patterns section refers to the X Series USB device READY, POWER, and
ACTIVE LEDs.
To Next Page
Loading...
Need help?
General
