Chapter 1 Introduction
DAQCard E Series User Manual 1-6
National Instruments Corporation
The following list gives recommended National Instruments cable
assemblies that mate to your DAQCard I/O connector.
♦
DAQCard-AI-16E-4
PSHR68-68M, a shielded 68-position ribbon cable, with male-to-
male connectors. This connects to an SH6868 or SH6850 shielded
cable.
PR68-68F, an unshielded 68-position ribbon cable
♦
DAQCard-AI-16XE-50
PSHR68-68M, a shielded 68-position ribbon cable, with male-to-
male connectors. This connects to an SH6868 or SH6850 shielded
cable.
PR68-68F, an unshielded 68-position ribbon cable
Unpacking
Your DAQCard E Series card is shipped in an antistatic vinyl box.
When you are not using your DAQCard, store it in this box. Because
your DAQCard is enclosed in a fully shielded case, no additional
electrostatic precautions are necessary. However, for your own safety
and to protect your DAQCard, never attempt to touch the connector
pins.
To Next Page
Loading...
