National Instruments E Series - Optional Cable Connector Descriptions

 National Instruments Corporation B-1 DAQCard E Series User Manual
Optional Cable Connector
Descriptions
Appendix
B
This appendix describes the connectors on the optional cables for the
DAQCard E Series cards.
Figure B-1 shows the pin assignments for the 68-pin AI connector. This
connector is available when you use the PSHR68-68M or PR6868 cable
assemblies with the DAQCard-AI-16E-4 or DAQCard-AI-16XE-50.
This document was created with FrameMaker 4.0.4