National Instruments E Series - Specifications

 National Instruments Corporation A-1 DAQCard E Series User Manual
Specifications
Appendix
A
This appendix lists the specifications of each DAQCard in the
DAQCard E Series. These specifications are typical at 25 ° C unless
otherwise noted.
DAQCard-AI-16E-4
Analog Input
Input Characteristics
Number of channels .......................... 16 single-ended, 16 pseudo-
differential, or 8 differential
(software-selectable on a per
channel basis)
Type of ADC..................................... Successive approximation
Resolution......................................... 12 bits, 1 in 4,096
Max sampling rate............................. 250 kS/s guaranteed
This document was created with FrameMaker 4.0.4