GPIB Hardware Installation Guide and Specifications | © National Instruments | 27
Connector
GPIB IEEE 488 24-pin connector (The PCI-GPIB/LP
uses a special cable to convert between the
Micro D-Sub connector of the board and the
GPIB connector.)
PCI Universal
Environment
Operating ambient temperature 0 °C to 55 °C
(Tested in accordance with IEC 60068-2-1 and
IEC 60068-2-2.)
Operating relative humidity 10% to 90%, noncondensing
(Tested in accordance with IEC 60068-2-56.)
Storage ambient temperature -20 °C to 70 °C
(Tested in accordance with IEC 60068-2-1 and
IEC 60068-2-2.)
Storage relative humidity 5% to 95%, noncondensing
(Tested in accordance with IEC 60068-2-56.)
PCI-GPIB+
Performance
GPIB
3-wire up to 1577 kbytes/s
HS488 up to 8182 kbytes/s
Power Requirements
3.3 V 170 mA, Typical
575 mA, Maximum
Physical Characteristics
Dimensions 10.67 cm × 11.99 cm (4.2 in. × 4.7 in.)
Connector
GPIB IEEE 488 24-pin connector
PCI Universal
To Next Page
Loading...
