National Instruments GPIB-PC - Page 104

Section Four A BASICA/QuickBASIC GPIB-PC Function Calls
©National Instruments Corp. 4A-29 GPIB-PC User Manual
4. Send END when the linefeed character is written for operations
involving the interface board BRD0%.
10 EOSV% = &H0A ' EOS info for IBEOS.
:
:
100 V% = EOSV% + &H0800
110 CALL IBEOS (BRD0%,V%)
120 REM Assume the board has been
130 REM addressed; do board write.
140 WRT$ = "123" + CHR$(&H0A)
150 CALL IBWRT (BRD0%,WRT$)
5. To send END with linefeeds and to terminate reads on linefeeds
for operations involving the interface board BRD0%, change line
100 in Example 4.
:
:
100 V% = EOSV% + &H0C00