National Instruments GPIB-PC - Board Function Calls

IBIC Section Five
GPIB-PC User Manual 5-22 ©National Instruments Corp.
Return to DOS.
Example:
DVM: e
Board Function Calls
Make the interface board the current board.
Example:
:ibfind gpib0
GPIB0:
Send the interface clear message (IFC) to all devices. This clears the
bus and asserts attention (ATN) on the bus. The user should check for
ERR after each GPIB function call to be safe.
Example:
GPIB0:
[0130] (cmpl cic atn)
ibsic