National Instruments GPIB-PC - Page 118

Section Four A BASICA/QuickBASIC GPIB-PC Function Calls
©National Instruments Corp. 4A-43 GPIB-PC User Manual
Device Example:
1. Change the primary GPIB listen and talk address of the device
PLOTTER% from the configuration setting to &H2A and &H4A
respectively.
100 V% = &HA ' Lower 5 bits of GPIB address.
110 CALL IBPAD (PLOTTER%,V%)
Board Example:
1. Change the primary GPIB listen and talk address of the
interface board BRD0% from the configuration setting to &H27
and &H47 respectively.
100 V% = &H7 ' Lower 5 bits of GPIB address.
110 CALL IBPAD (BRD0%,V%)