National Instruments GPIB-PC - Page 257

Index
GPIB-PC User Manual I-2 ©National Instruments Corp.
C
Calling Syntax 3-1
Characteristics
device/board 2-11
each GPIB 2-7
electrical GPIB 1-5
instruments 2-7
physical GPIB 1-5
Clearing
device 3-4
the GPIB 3-4
Concepts and terms, device map 2-11
Configuration
requirements 1-9
linear 1-7
star 1-8
Configurations, default 2-8
Controller-In-Charge 1-2,
Count variable 4-11
D
Data lines 1-3
Data transfer termination method 4A-26
Default characteristics, functions that alter 2-17
Default configurations 2-8
Primary 2-8
Device
characteristics 2-12
clearing 3-4
function calls 4-12
functions 3-14
Primary GPIB Address 2-12
Secondary GPIB Address 2-12
Timeout Settings 2-12
Device map for board GPIBx, upper level 2-10
Device map, concepts and terms 2-11
Device/board characteristics, lower level 2-11
Differences between software revisions C-1
Disable auto serial polling (Boards Only) 2-15
DMA channel (Boards Only) 2-16