National Instruments PCI-8430 - Page 159

UninstalltheWindowsSoftware
BeforeyouuninstalltheNI-Serialsoftware,youmustremovethe
hardwareinformationfromyoursystem,asdescribedinDeleteaSerial
Interface.
TouninstalltheNI-Serialsoftware,completethefollowingsteps:
1. SelectStart»ControlPanel.
2. OnWindows2000/XP/Server2003,double-clickthe
Add/RemoveProgramsicon.OnWindowsVista,double-click
theProgramsandFeaturesicon.
3. SelectNationalInstrumentsSoftwareinthelistandclickthe
Change/RemovebuttononWindows2000/XP/Server2003orthe
Uninstall/ChangebuttononWindowsVista.
4. Selectthesoftwarecomponentsyouwanttoremoveandclickthe
Removebutton.Theuninstallationprogramremovesallfolders,
utilites,andregistryentriesassociatedwiththeNI-Serialsoftware.
5. ShutdownWindows,poweroffyourcomputer,andphysically
removetheserialinterfacesfromyoursystem.
Theuninstallationprogramremovesonlyitemsthatthesetupwizard
installed.Ifyouaddedanythingtoadirectorythatthesetupwizard
created,theuninstallationprogramdoesnotdeletethatdirectory.You
mustremoveanyremainingcomponentsyourself.
Toreinstallthehardwareandsoftware,refertoInstalltheHardwareand
NI-SerialSoftwareInstallation.