National Instruments PCI-8430 - Page 37

LabVIEWRT
ToinstalltheNI-SerialsoftwareonyourLabVIEWRTtarget,firstfollow
steps1–3intheprecedingsectiontoinstallthesoftwareontothe
Windowshostmachine.Thencompletethefollowingsteps:
1. LaunchMAX.
2. ExpandRemoteSystemsbyclickingthe+nexttoit.
3. Findyourremotesysteminthelistandexpandit.
4. Right-clickSoftwareandselectAdd/RemoveSoftware.
5. IntheAdd/RemoveSoftwarewindow,clickNI-Serialandselect
Install.TouseVISAInteractiveControlandVISAtestpanels,you
mustalsoinstallNI-VISAServer.
6. ClickNexttostartthesoftwaredownload.ClickFinishwhenthe
downloadiscomplete.
7. ShutdownyourRTcontrollerandinstallyourRTserialhardware.