What do the LEDs on the front panel mean?
Refer to the LED status descriptions in the Front Panel Features section.
How do I check the configuration of the memory, hard drive, time/date, and
so on?
You can view these parameters in the BIOS setup. Complete the following steps to
enter the BIOS setup:
1.
Reboot the NI PXIe-8840 Quad-Core.
2.
Press <Delete> during the memory tests.
Refer to the Accessing BIOS Setup Utility section of the
NI PXIe-8840 Quad-Core User Manual for more information.
Can I use the internal Serial ATA drive and an external hard drive at the same
time?
Yes. Refer to the BIOS Setup Utility section of the NI PXIe-8840 Quad-Core User
Manual for more information.
What devices can I boot from?
The NI PXIe-8840 Quad-Core can boot from the following devices:
■
The internal Serial ATA solid-state drive.
■
An external SCSI hard drive or SCSI CD/DVD-ROM if a SCSI adapter, such as
the PXI-8214, is used.
■
A network PXE server on the same subnet.
■
An external USB mass storage device such as a USB hard drive, USB CD/DVD-
ROM, or USB flash drive.
■
An external USB floppy drive.
■
Most PCI or PCI Express-based devices that provide an Option ROM.
Note There are limitations when booting from a USB device. You can
install Windows 7 and later from a USB CD/DVD-ROM, but not earlier
ni.com
16
PXIe-8840 Quad Core
To Next Page
Loading...
