How do I connect a VGA monitor to the NI PXIe-8840 Quad-Core?
A DisplayPort-to-VGA adapter (part number 782271-01) is included with your kit. You
can use this adapter to connect a VGA monitor to a DisplayPort connector.
How do I connect two monitors to the NI PXIe-8840 Quad-Core?
The NI PXIe-8840 Quad-Core includes two DisplayPort connectors. You can connect
each to a separate monitor for dual monitor support.
How do I install or reinstall the video driver?
Refer to KnowledgeBase 3H3COSD8, What Peripheral Drivers Should I Use with My
PXI or VXI Controller?, at ni.com/support.
How do I install or reinstall the Ethernet driver?
Refer to KnowledgeBase 3H3COSD8, What Peripheral Drivers Should I Use with My
PXI or VXI Controller?, at ni.com/support.
How do I install or reinstall the GPIB driver?
The NI-488.2 driver for your GPIB port is installed by default when your controller is
first shipped from the factory. To change the default installed driver, complete the
following steps:
1. Download the latest GPIB driver from ni.com/downloads.
2. Install the driver and verify that the driver has properly detected the GPIB
device in the Device Manager. If you need more assistance, refer to ni.com/
getting-started/.
How do I install soware from a CD?
The compact size of the NI PXIe-8840 Quad-Core does not allow for an integrated
USB CD/DVD-ROM drive. You have the following options:
•
USB CD/DVD-ROM—You can install from a USB CD/DVD-ROM using a bootable
installation CD.
ni.com
18
PXIe-8840 Quad Core
To Next Page
Loading...
Need help?
General
