18 | ni.com | RMC-8356 Installation Guide
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment
for digital devices and information technology equipment:
• EN 55032 (CISPR 32): Class A emissions
• EN 55024 (CISPR 24): Immunity
• AZ/NZS CISPR 32: Class A Emissions
• FCC 47 CFR Part 15B: Class A emissions
• ICES-003: Class A emissions
Note In the United States (per FCC 47 CFR), Class A equipment is intended for use
in commercial, light-industrial, and heavy-industrial locations. In Europe, Canada,
Australia and New Zealand (per CISPR 32) Class A equipment is intended for use
only in non-residential locations.
Note For EMC declarations and certifications, and additional information, refer to
the Online Product Certification section.
CE Compliance
This product meets the essential requirements of applicable European Directives as follows:
• 2014/35/EU; Low-Voltage Directive (safety)
• 2014/13/EU; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance
information. To obtain product certifications and the DoC for this product, visit
ni.com/
certification
, search by model number or product line, and click the appropriate link in the
Certification column.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the Minimize Our Environmental Impact web
page at
ni.com/environment. This page contains the environmental regulations and
directives with which NI complies, as well as other environmental information not included in
this document.
To Next Page
Loading...
Need help?
General
