National Instruments RMC-8356 - Power Management Features; Front Panel Leds; System Management; RMC-8356 Description

RMC-8356 Installation Guide | © National Instruments | 5
Power Management Features
• ACPI/ACPM power management
• Main switch override mechanism
• Wake-On-LAN (WOL) header
• Wake up on keyboard/mouse from Soft-Off
• Power-on mode from AC power recovery
Front Panel LEDs
• Power indicator
• Power shuttle indicators
• LAN status indicators
• HDD indicator
• System temp (overheat) and fan (fail) warning indicator
System Management
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• +5 V standby alert LED
• Fan speed control
RMC-8356 Description
Figure 1 shows the key features of the RMC-8356 front panel. For detailed information about
the RMC-8356 rear panel, refer to Chapter 3, I/O Information, in the RMC-8356 User Manual.
Figure 1. Front View of the RMC-8356
The front of the chassis includes the following features:
• SATA HDD—Hot-swap 3.5” SATA hard disk drive.
• USB Ports—Two front-access USB 3.0 ports.
1 SATA HDD
2USB Ports
3COM Port
4 Control Panel
5 Rack Ear Brackets
2 3 4
1 1 1
1
5
5