2-36 | ni.com
Chapter 2 Basic Functions
This parameter is applied when you turn the POWER switch off and on or when you execute
APPL with CF40.
If the LAN interface settings are reset (CF40: LCi/dEF) this is set to (110).
CF42 to CF45 Manual IP Address Setting (Manual IP Function)
If you do not want to or cannot use a DHCP server or if you do not want to or cannot use the
AUTO IP function, set the IP address manually. This parameter is displayed and can be set only
when the LAN interface is in use.
These parameters are applied when you turn the POWER switch off and on when you execute
APPL with CF40.
Value/Display Parameter Description
_ _¯ DHCP:OFF, AUTO IP: OFF, MANUAL IP: ON
_¯_ DHCP:OFF, AUTO IP: ON, MANUAL IP: OFF
_¯ ¯ DHCP:OFF, AUTO IP: ON, MANUAL IP: ON
¯_ _ DHCP:ON, AUTO IP: OFF, MANUAL IP: OFF
¯_¯ DHCP:ON, AUTO IP: OFF, MANUAL IP: ON
¯ ¯_ DHCP:ON, AUTO IP: ON, MANUAL IP: OFF
(factory default setting)
¯ ¯ ¯ DHCP:ON, AUTO IP: ON, MANUAL IP: ON
Parameter Number Value Description
CF42 0 to 255 Sets the first IP address number.
CF43 0 to 255 Sets the second IP address number.
CF44 0 to 255 Sets the third IP address number.
CF45 0 to 255 Sets the fourth IP address number.
To Next Page
Loading...
Need help?
General
