Native Instruments Maschine - MASCHINE in a Recording Setup

►
Plug the 1/4" TRS jack of your headphones into the PHONES socket nearby.
►
Start the playback of a Project in MASCHINE or an audio file on your computer.
►
Gradually turn the PHONES VOLUME knob on the MASCHINE controller until you reach
a good listening level.
2.3.3 MASCHINE in a Recording Setup
The following instructions will assist you in using the MASCHINE controller in a recording sit-
uation for capturing audio to MASCHINE — for example, for recording samples or process a
live input during a performance.
You can use the described setups with MASCHINE as well as with any other music soft-
ware running on your computer. For the required configuration on the software side, see
↑2.2.1, Using Your Controller as Audio Device in the MASCHINE Software or ↑2.2.2,
Selecting the MASCHINE Controller as Audio Device in Other Music Software, respec-
tively.
Setting Up MASCHINE
Setup Examples
MASCHINE - Setup Guide - 16