Need help?Do you have a question about the Native Instruments Komplete Audio 6 and is the answer not in the manual?
General| Audio Resolution | 24-bit/192kHz |
|---|---|
| Power Supply | USB bus powered |
| Audio Interface Type | USB |
| Simultaneous I/O | 6 x 6 |
| Number of Preamps | 2 |
| A/D Resolution | 24-bit/192kHz |
| MIDI I/O | 1 x MIDI In, 1 x MIDI Out |
| USB | USB 2.0 |
| Phantom Power | Yes |
| Digital Inputs | 1 x Coax (S/PDIF) |
| Digital Outputs | 1 x Coax (S/PDIF) |
| Headphone Output | 1 x 1/4" TRS |
| Software Included | Komplete Elements |
| Outputs | 4 x analog (2 x TRS, 2 x RCA) |
Lists the items included in the KOMPLETE AUDIO 6 box, such as the audio interface, USB cable, and registration flyer.
Explains document formatting like italics, blue text, orange text, bold text, and special icons used for tips, important info, and warnings.
Details the installation process for KOMPLETE AUDIO 6 on Mac OS X, noting it uses built-in drivers.
Explains the two components installed for Windows: driver and Control Panel software. Includes important installation information.
Provides step-by-step instructions for installing the KOMPLETE AUDIO 6 driver software on Windows, including running the setup executable.
Describes how to connect the KOMPLETE AUDIO 6 hardware to the computer via USB after software installation.
Guides users through setting the KOMPLETE AUDIO 6 as the default audio output device in Windows sound preferences.
Guides users through setting the KOMPLETE AUDIO 6 as the default audio output device in Mac OS X System Preferences.
Explains how to configure the KOMPLETE AUDIO 6 as the audio output device within music production or DJ software.
Provides a general overview of the KOMPLETE AUDIO 6's functions, including sound conversion, playback/monitoring, and recording.
Details the controls and features on the front panel, including input gain, line/instrument modes, and monitor section functions.
Describes the rear panel connections, including phantom power, USB, MIDI, balanced outputs, and digital I/O.
Explains the top panel features, including the main volume control and status LEDs for monitoring connections.
Details the function of each status LED on the top panel, indicating signal presence, clipping, phantom power, USB connection, and monitoring modes.
Guides users to access advanced settings on Windows via the Control Panel software.
Details the Audio Settings page in the Windows Control Panel, covering sample rate, buffer size, and direct monitoring.
Introduces the Diagnostics page in the Windows Control Panel for monitoring performance and detecting errors.
Explains how to access advanced configuration settings on Mac OS X using the Audio MIDI Setup utility.
Details the Input pane of Mac OS X's Audio MIDI Setup, covering clock source, sample rate, and Thru checkboxes.
Provides instructions on connecting active (self-powered) monitor speakers to the KOMPLETE AUDIO 6.
Explains how to set up the KOMPLETE AUDIO 6 with passive speakers, requiring an external amplifier or mixer.
Details how to connect headphones to the KOMPLETE AUDIO 6 for monitoring audio output.
Introduces using the KOMPLETE AUDIO 6 for recording audio into a computer, with monitoring.
Guides the connection of a condenser microphone, including activating phantom power and setting input gain.
Details connecting a dynamic microphone, emphasizing phantom power deactivation and input gain adjustment.
Explains connecting guitars/bass guitars for recording and monitoring with headphones.
Describes connecting line-level devices like synthesizers, computers, or mixers.
Details connecting MIDI controllers and synthesizers for MIDI data transfer.
Explains the S/PDIF digital I/O capabilities for connecting digital audio devices.
Guides the connection of a DAT tapedeck using S/PDIF digital connections and setting up sync sources.
Details connecting a synthesizer with digital output via S/PDIF and configuring sync.
Explains the Direct Monitoring feature for zero-latency monitoring of inputs, detailing modes and limitations.
Provides steps to resolve hardware issues, including driver verification, USB connection checks, and cable replacement.
Explains how to verify driver installation in Windows by checking the Control Panel and program entries.
Details how to check driver installation on Mac OS X by looking for the KOMPLETE AUDIO 6 icon in System Preferences.
Links to specific knowledge base articles for troubleshooting issues on Windows systems.
Provides guidance on selecting the correct USB cable to prevent connection issues and erratic behavior.
Lists available support resources like the Knowledge Base, Technical Support contact, and the NI online forum.
Explains ground loops as a common audio noise problem and provides a link to a knowledge base article for resolution.
Lists detailed technical specifications for the KOMPLETE AUDIO 6, including output, sampling rate, bit resolution, impedance, and frequency response.
Explains the concepts of audio latency and buffer size, their impact on performance, and how to adjust them.
Discusses the importance of using the dedicated ASIO driver for KOMPLETE AUDIO 6 on Windows and alternative ASIO drivers.
Contains legal disclaimers, copyright notices, and trademark acknowledgments for Native Instruments and third-party software.
Lists contact addresses and website URLs for Native Instruments offices globally, including headquarters and regional branches.
To Next Page
