Native Instruments Komplete Audio 6 User Manual

2.2.2 Installing the Driver Software
To install the KOMPLETE AUDIO 6 driver software on Windows:
1. Locate and double-click the Komplete Audio 6 Driver Setup PC.exe file to start the installa-
tion procedure.
2. In the installation prorgam’s Welcome screen, click Next. Then, follow the on-screen in-
structions.
Installing KOMPLETE AUDIO 6
Installing KOMPLETE AUDIO 6 on Windows
KOMPLETE AUDIO 6 - Manual - 11

Native Instruments Komplete Audio 6 Specifications

General

Audio Resolution	24-bit/192kHz
Power Supply	USB bus powered
Audio Interface Type	USB
Simultaneous I/O	6 x 6
Number of Preamps	2
A/D Resolution	24-bit/192kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Phantom Power	Yes
Digital Inputs	1 x Coax (S/PDIF)
Digital Outputs	1 x Coax (S/PDIF)
Headphone Output	1 x 1/4" TRS
Software Included	Komplete Elements
Outputs	4 x analog (2 x TRS, 2 x RCA)