Native Instruments TRAKTOR KONTROL X1 User Manual

4.3 Transport Section
CUE
The CUE Button
If a
Deck is stopped, pressing CUE will place the white Cue Marker at the current location—if
the white Cue Marker is already at the current location, then playback will commence for as
long as you hold CUE (playback will jump back to the Cue Marker and stop when you release
the CUE button). If the Deck is playing and you press CUE, playback will stop and jump back
to the Cue Point.
PLAY
The PLAY Button
Pressing either
of the PLAY buttons will toggle playback on the corresponding TRAKTOR deck.
Whilst the track is playing, pressing the PLAY button again will pause the deck.
FLUX (TAP)
The FLUX Button
Pressing the FLUX
button will engage TRAKTOR's Flux Mode. Flux mode lets you jump to cue
points and loops without losing the phrasing of your tracks. For a more detailed explanation of
this mode, refer to section ↑3.5.5, FLUX Buttons.
The FLUX button's secondary function TAP can be activated via:
►
Holding SHIFT + tapping FLUX (TAP), this will allow you to manually input a track's tem-
po to a corresponding TRAKTOR deck.
Hardware Reference
Transport Section
Traktor Kontrol X1 Mk2 - Manual - 38

Native Instruments TRAKTOR KONTROL X1 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL X1
Category	DJ Equipment
Language	English