NV30/NV40 Operations and Maintenance Manual Operating the transmitter
Page 2-10 Issue 3.3 2014-12-10
List of AUI pages
Table 2.1 defines the available AUI pages.
Each AUI page provides information about a specific transmitter function. All navigation through
the AUI pages begins on the main screen shown in Figure 2.4 on page 2-11.
Table 2.1: AUI Pages
AUI Page Function See Page
Home View meters, tool menu panels, choose options and
navigate to other pages.
page 2-14
Menu Choose options and navigate to other pages. page 2-15
Transmitter Log View transmitter event history. page 2-16
Tool Menu Choose tool menu panel options. page 2-25
Meters List View Choose meters for display. page 2-40
Presets Edit user-defined presets. page 2-44
Transmitter Status View transmitter’s current active faults and
operational status.
page 2-59
Factory Settings View critical transmitter parameters. page 2-61
System Settings Users determine critical system configuration
parameters.
page 2-70
User Accounts Set user permission rights and define user account
information.
page 2-79
Changeover Set main exciter and auto exciter changeover
function.
page 2-83
User Settings
Set network information, configure email and alarm
notification parameters, configure Exgine interface
information, configure SNMP information, capture
critical parameters, set time and date, enable/
configure NTP servers and set call sign/ID.
page 2-84
Remote I/O Define remote digital inputs/outputs and configure
analog outputs.
page 2-104
To Next Page
Loading...
