NV30/NV40 Operations and Maintenance Manual Operating the transmitter
Page 2-66 Issue 3.3 2014-12-10
Redundant supplies
This factory setting (see Figure 2.48 ) supports configuring redundant fan, IPA, LVPS and 12 V
power supplies. Select
Yes (default) if the supply operates as a redundant set. Select No if the supply is
standalone.
Figure 2.48: Factory Settings - Redundant Supplies
WARNING: Device settings are established at the factory and should not
require any adjustment. These settings affect critical system protection
circuits. Making changes to these settings may void your warranty.
Contact Nautel before making changes.
To Next Page
Loading...
