Nautel NV30 - Page 98

NV30/NV40 Operations and Maintenance Manual Operating the transmitter
Page 2-80 Issue 3.3 2014-12-10
Setting user permission level
There are four levels of permission that can be assigned to users, each with their own specific
function. All users have permission to change their own username and password, but are otherwise
limited to the following functions:
• View Only: Can monitor equipment data only. No administrative or control functions.
• Full Control: Can monitor and control equipment, with no administrative functions.
• Administrator: Can perform all functions. Administrator is the only permission level that
allows addition, removal or modification of users.
• Custom: Administrator can customize the user permissions by manually selecting the per-
mission levels.
Editing account information
Adding an account
You must be an Administrator to use this function.
Procedure to add a user (see Figure 2.62 on page 2-82):
1. Open the User Accounts page.
2. Press Add (bottom of the screen) to open a small Add User window.
3. Beside Username, enter a name that identifies the new user, and press OK.
4. Select the new user to edit the settings.
5. Beside
User Type, press the arrow to reveal a drop-down menu and select a type of user. If
you select Custom as the type of user, then go to the Permissions section of the screen and
mark individual permissions (see Changing permissions on page 2-81).
6. Press Apply to confirm your entries and create a new user or press Cancel to ignore your
entries and exit the small window without creating a new user.
Editing an existing account
To edit an existing user account, press on the desired user in the Users list on the left-side of the AUI.
The
Settings for that user will be displayed on the right-hand side of the AUI. You can edit the
Password, User Type (see Setting user permission level above), Auto Login status and Permissions.