History of Changes in this Product Manual
Software/firmware dependencies
This revision of the manual is valid for the latest software/firmware versions listed below and
any newer releases. Please check www.nauticast.com/downloads for available updates.
Safety warnings
This AIS transponder is solely an aid to navigation and can under no circumstances provide complete
and accurate navigation information. AIS is not a replacement for vigilant human lookouts and other
navigation aids such as RADAR. The performance of the transceiver may be seriously impaired if not
installed as instructed in the product manual or due to other factors such as weather and or nearby
transmitting devices. Compatibility with other systems may vary and relies on third party systems
recognising the standard outputs from the transceiver. The manufacturer reserves the right to
update and change these specifications at any time and without notice.
Safety of Life Systems
Nauticast devices may only be used in safety of life devices or systems with the express written
approval of Nauticast. The unsolicited and untested use of Nauticast devices in safety of life devices
or systems may jeopardize the safety or the life of the user or other persons.
Important information for US customers
There are specific laws in the USA regarding the configuration of AIS Class B transceivers.
If you are a US resident and intend to use your AIS Class B transceiver in US waters, you should
make sure that your retailer has configured your product prior to supplying it to you. If your AIS
transceiver has not been pre-configured please contact your dealer for details of how to have it
configured. In the United States the MMSI and static data may only be entered by an
authorized dealer; the end user of the equipment is not authorised to enter or change
their own vessel data.
To Next Page
Loading...
