37
3
Change NaviLink to AP mode.
• Change to AP mode by holding the right button of NaviLink for 3
seconds or longer. NaviLink APN is created at random if you run
the AP mode in NaviLink.
4
On your smartphone, tap Settings → Wi-Fi → NlinkXXXX (e.g.:
Nlink1234) to complete the connection as NaviLink AP.
Tap Next after the connection is complete.
5
Select a router to connect the NaviLink to → enter the router’s
password → tap OK.
• If the router to connect does not appear on the list, refresh the
router list.
• If the password has not been set, skip entering the password and
tap OK.
To Next Page
Loading...
Need help?
General
