30 NCR RealPOS 60 Terminal Site Preparation
Customer Enclosure
Observe the following guidelines when placing the terminal inside an enclosure:
• Leave at least 90 mm (3.5 in.) in the rear and 40 mm (1.5 inches) of clearance on sides
and top.
• The enclosure must provide adequate ventilation.
• The enclosure doors must be of a type that allows adequate airflow through the
enclosure from front to back.
• The enclosure ventilation must maintain an internal temperature as close to room
ambient temperature as possible, and always below the maximum specified
operating temperature (40C / 104F).
To Next Page
Loading...
