AE- 1 5 0 s y s t e m – U s e r M a n u a l
50
o Data Selection: The Data Selection tab is where all acquired data (i.e.
PrPDs, Waveforms, Vectors and Pinpoints) can be sorted and selected
prior to proceed with localization. It includes four sections: Filter, Results,
Comments Log and Preview.
Filter: The filter section is used to select data based on date range,
types of data and positions of sensors. When the Filter Enabled
check box is deselected, all data is available for the Results and
Preview window. When the Filter Enabled is selected, a date range
and time can be selected in the From and To windows by clicking
on the calendar/clock icon unless Include All Dates check box is
selected. Check the Waveforms, PrPD, Vectors, and Pinpoints
checkboxes to make that data available for Results and Preview
windows. Select the desired Sensors Position or click Select All to
select all sensor positions. A three dimensional representation is
present with all selected AE-150 positions represented by the four
acoustic sensors.
Results: In this section, the Sort By selection is used to sort data in
the Results window by Time, Type of data, or Sensors Position.
The Select All, Flag (+) and Flag (-) buttons are used to select data
that will be relevant for the localization process:
To keep an acquisition, select it from the list, then click
Flag (+). The flagged state of the acquisition will become
Yes.
To discard an acquisition, Click Flag (-), its state will
become No.
Comments Log: The Comments Log contains the remarks entered
during the inspection.
Preview: The Preview window displays the data highlighted in the
Results window.
o Localization: The Localization tab is used to make final selection of
available vectors and pinpoints in order to determine the partial discharge
localization in the transformer tank.
Flagged List: The Flagged list is a list of all previously flagged
items from the list in the Data Selection tab. Click Select All to
To Next Page
Loading...