© Pro Advantage by NDC. All rights reserved
PS-733 Rev 00-3/10 18/23
Table 2: English – Standard (S.I.) Units (S1 & S2)
How to change the printed/displayed units
The Pro Advantage Urine Analyzer has the ability to change the units in which the results are displayed and
printed.
1. Start at the Main Menu screen and hold the “DOWN” selection key and press the “NO” key
2. The units will change from C1 to C2 to S1 to S2 (see Fig. 26 and 27).
S1 – English – International (Normal System)
S2 – English – International (Plus System)
Figure 26: Conventional Units (Standard) Figure 27: Conventional Units (Plus)
To Next Page
Loading...