To Next Page

To Previous Page

››iMANAGER

Front view: Back View:

NUMBER FUNCTION

1 Display touch screen

2 Hole for the passage of the supply cable

3 4 Holes to fasten the cover to the wall

4 System for fastening the frame display to the cover

2.2 Accessories for installation

n°1 Suppy cable

n°2 Temperature probes

n°8 Mounting screws

8. AUXILIARI FUNCTIONS

8.1 Warnings

If one or both batteries are left unused with a

voltage lower than 12.3V (therefore discharged)

or under discharge for more for more than 15

consecutive days, the iManager will show the

following warning screen on the display:

If the device is set on the "power saving" mode,

this warning will be displayed upon reactivation

(by just tapping the display, or by reactivating a

charging source, etc.).

To quit the warning screen, you have to click on

the screen close icon on the lower right corner.

By touching anywhere else on the display, you

access the screen which explains briefly the

meaning of sulfation:

By touching anywhere on the display, you exit this

screen and go back to the main one.

8.2 Turning off the Display

You can switch the display off at any time by simply tapping the red icon with the

power-off symbol on the upper right corner of the screen.

When the display is off, to reactivate it just touch it.

Remember to never leave the batteries discharged (or partially charged) for a

long time. For excellent and lasting performance, always keep them fully

charged.

NDS iMANAGER User Manual

Questions and Answers: