Neat IOR - Connecting to TREX Receiver; Programming TREX Alarms

Connecting IOR to Portable Receiver TREX
When an input on IOR is activated, an alarm is sent. The portable alarm
receiver TREX can be programmed to receive alarms sent by IOR when
a particular input on the IOR is activated.
To program a TREX to receive alarms triggered by one input on IOR,
perform the following steps:
1. Choose Programming and then Add transmitter from the menu
in the TREX.
2. Activate the input on IOR or press the button inside IOR once
for input 1, twice for input 2 etc, with no more than 1 second
between each button press (see footnote).
3. The LED inside IOR flashes to indicate that the radio code is
transmitted. The TREX beeps to indicate that a radio code is
received.
4. Choose an alarm text and alarm number in the TREX.
See the TREX User Guide for further information on how to add a
transmitter in TREX.
11