Unpack the IP7WW-082U-B1 Card
Quick Install Guide – SL2100 Terminals Type B rev 1.0 7
1- Unpack the IP7WW-082U-B1 Card
SL2100 Extension Interface card
1 x Interface card
Additional Items Required:
Cross head screwdriver.
Utility knife or small cutters to remove the plastic knockouts
Solid wire for extending telephone cabling:
Recommended cable type: Twisted pair (CW1308 or similar specification)
Conductor diameter: 0.4 to 0.6 mm
Maximum cable length: (with 0.5 mm diameter cable)
SL2100 system telephone – 300 metres
Normal telephone (SLT) – 1125 metres
To Next Page
Loading...
