3. Follow the instructions in the Name Programming chart
shown below.
4. Press + to exit.
Name Programming
134
Name Programming
Press a key the indicated number of times for desired character
Key 1 Time 2 Times 3 Times 4 Times 5 Times 6 Times 7 Times 8 Times 9 Times
1 &- /‘1
2 ABCa b c 2
3 DEFd e f 3
4 GHIghi4
5 JKL j k l 5
6 MNOmn o 6
7 PQRSpq r s 7
8 TUV t uv8
9 WX Y Zw x y z 9
0 space : 0
#
Not used
*
Not used
After selecting a letter, press a key for another letter or wait 2 seconds for the cursor to automatically advance.
Additional Name Programming Options
HOLD
Save name. In system programming, HOLD saves and exits name programming.
CONF
Exit name programming without saving name.
VOL Up
Scroll the cursor to the left.
VOL Dn
Scroll the cursor to the right.
MW
Put the cursor after the last entry.
LND
Delete the character under the cursor.
FLASH
Delete the character to the right of the cursor.
CLEAR
Clear the entire entry.
CHECK
Restore the previous entry.
80000MFH07_02.qxd 6/2/04 9:39 AM Page 134
To Next Page
Loading...
Need help?
General
