NEC DS1000 Feature Handbook

195
User Programmable Features
To program a feature, press # and the feature's code. F or example, to enable incoming Paging, press # and dial V P Y , then SPK to
hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to the attendant.
Feature Mnemonic Numeric Operation
Call Forwarding Clear All
#CC #22
#CC
+ Y to clear (cancel) forwarding or N to exit without clearing +
SPK to hang up.
Headset Mode
#HS #47
#HS
+ Y to enable or N to disable + SPK to exit.
Hotline
#HL #45
#HL
+ Press flashing Hotline key + Enter extension for new Hotline
partner +
HOLD + Program another Hotline key or SPK to exit.
Off Hook Signaling
#OHS #647
#OHS
+ Select mode (C=Outside line, I=ICM, D=Hotline) + Select
option (see below) +
SPK to exit.
Outside line options: C =Camp On tone, O =Off Hook Ringing, 0 = None
Intercom options: C=Camp On, V=Voice Over, 0=None
Hotline Options:
C=Camp On, V=Voice Over, 0=None
Paging (Incoming)
#VP #87
#VP
+ Y to enable or N to disable + SPK to exit.
Prime Line Assignment
#PLA #752
#PLA
+ Press one of your flashing programmable keys or ICM +
SPK to exit.
Programmable Function
Key Assignments
#KP #57
#KP
+ Press key you want to program + HOLD + ICM + Press VOL
Up
or VOL Down to select key option + HOLD + (Enter any addi-
tional data if required +
HOLD) + Press VOL Up or VOL Down to
select another key to program, or
CONF + SPK to exit.
Programmable Function
Key Ringing
#RAC #722
Call Coverage Keys: #RAC + Call Coverage Key repeatedly to select
ringing mode +
SPK to exit.
Call Coverage Keys flash as follows: Lamp only=On red, Immediate
ring=On green, Delay ring=Fast flash green.
#RAL #725
Outside Line Keys: #RAL + Line Key repeatedly to select ringing
mode +
SPK to exit.
Line keys flash as follows: Lamp only=On red, Immediate ring=On
green, Delay ring=Fast flash green, Night ring=Slow flash green.
#RAP #727
Group Call Pickup Keys: #RAP + Group Call Pickup Key repeatedly
to select ringing mode +
SPK to exit.
Group Call Pickup Keys flash as follows: Lamp only=On red, Imme-
diate ring=On green, Delay ring=Fast flash green.
Ringing Line Preference
#RLP #757
#RLP
+ Y to enable or N to disable + SPK to exit.
Speed Dial, Personal
#SP #77
#SP
+ Press bin key (for bins 701-710) or DIAL then bin key (for
bins 711-720) +
HOLD + Dial outside line (e.g., 1), Line group (e.g.,
90-98), or
ICM for Intercom feature + HOLD + Number to store +
HOLD twice + Name + HOLD + Press another bin key or SPK to exit.
Speed Dial, System
#SP #77
#SP
+ Dial System Speed Dial bin number (e.g., 200) + HOLD +
Dial outside line (e.g., 1), Line group (e.g., 90-98), or
ICM for Inter-
com feature +
HOLD + Number to store + HOLD twice + Name +
HOLD + Dial another System Speed Dial bin or SPK to exit.
Time and Date
#TD #83
#TD
+ Enter time in 24-hour clock using hours (2 digits), minutes (2
digits) and seconds (2 digits) +
HOLD + Enter date using month (2
digits), day (2 digits) and year (4 digits) +
HOLD + SPK to exit.
Intercom Voice Announce
(for incoming Intercom calls)
#VA #82
#VA
+ V for voice announce or R for ring + SPK to exit.
User Programmable Features
80000MFH07_02.qxd 6/2/04 9:39 AM Page 195

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English