8
4.3.10 H0405-0013-40002 FX2B CABLE SET
Removal
1. Perform Steps 1 through 3 of Section 4.3.6.
2. Disconnect the FX2B-40SA cable/FX2B-52SA cable.
The connector on G7HKP side must be installed in the upper part of the chassis. Make
sure the orientation of the connector according to the label attached on the chassis.
The FX2B cable has a connector with locking mechanism. Make sure to unlock it before
disconnecting the cable.
Installation
Reverse the removal procedure.
To Next Page
Loading...
