1
1. Overview
The Blade Assembly Unit is designed to be dedicatedly installed in the rack."
Up to six CPU blades (N8400-020F, 021F, or 022F) can be installed.
Up to two N8406-005F intelligent switches (L2) can be installed. (However, additional
power units must be installed in the Blade Assembly Unit (4U) depending on the number
of installed CPU Blades.)
IMPORTANT: To avoid personal injury, at least four
persons are required to install or remove the CPU Assembly
Unit into/from the rack.
1.1 Model Numbers and Product Names
N Code Product Name Description
N8405-013F Blade Assembly Unit (4U)
1.2 Overview of the Unit
Table 1.2.1 Overview of the Blade Assembly Unit (4U)
Blade Assembly Unit (4U)
N8405-005F
Chassis 4U
(Up to 6 CPUs, up to 2 switch blades, up to 12 HDDs, and up to 4
power supply units)
External
dimensions
442 mm x 885.7 mm x 177 mm (4U)
Power
supply unit
4 Max. (1: factory-installed, 3: additional for power redundant
configuration)
Standard 0 HDD
Maximum SCSI 146.2GB x 12 (One CPU blade can contain two hard disk
drives)
To Next Page
Loading...
