NEC Express5800 Series Manual

Page.20
■ For B120e-h
chapter Section paraphrased contents
2 1.2.2
(3) PCI Configuration submenu
(a) PCI Device Controller and Option ROM Settings submenu
Wrong: ― I/O Blade
See (b)I/O Blade submenu for this item.
This item is displayed when N8404-001F AD106a, N8404-003F AD106b, N8404-007F AD106c and
N8404-005F AT101b are installed.
Correct: ― I/O Blade
See (b)I/O Blade submenu for this item.
This item is displayed when N8404-007F is installed.
2 1.2.2 (4) Advanced Chipset Configuration submenu
Wrong:
Periodic SMI Disabled
[Enabled]
Enable or disable periodic SMI interrupt.
Correct: This item is not displayed.
■ For B120e
chapter Section paraphrased contents
2 1.2.2
(3) PCI Configuration submenu
Wrong: ― I/O Blade
See (b)I/O Blade submenu for this item.
This item is displayed when N8404-001F AD106a, N8404-003F AD106b, N8404-007F AD106c and
N8404-005F AT101b are installed.
Correct: ― I/O Blade
See (b)I/O Blade submenu for this item.
This item is displayed when N8404-007F is installed.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)