TERMINAL SETUP
19
6.
Select desired tone type.
TO SET RINGING OF HEADSET
Following explains how to enable/disable the ringing
of headset.
This feature is required both terminal
and system setting at initial installation.
For details, please contact the system
administrator.
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “
1
Incoming Call”
4.
Select “
2
Headset Ring”.
5.
Select whether to ring the headset ringer.
Tone Type 1 to Tone Type 8:
In the preview function, each ringer
tone sounds continuously. However
when “ 0 Automatic” is selected, each
ringer pattern of internal and external
incoming calls is determined by the
initial system settings. For details,
please contact the system
administrator.
When selecting “ 0 Automatic”, the
preview function will not operate.
Setting by Feature key and become
effective.
The "Music Ring 1/2/3" have been
downloaded at factory to terminal
firmware 2.1.0.0 or later. When you
use ring tone music source other than
"Music Ring 1/2/3", please download
other music file.
For the procedure of downloading a
ringer tone file, please refer to “TO
DOWNLOAD A FILE”.
TO SET ILLUMINATION PATTERN
To Next Page
Loading...
