NEC ITK-32LCG-1P User Manual

FEATURE OPERATION
67
DND (DO NOT DISTURB)
This feature restricts incoming calls to a terminal.
This feature is set by Soft key or
feature key. The feature key is set by
system data setting at initial
installation. For details, please contact
the system administrator.
TO SET DND
1. Press Speaker key.
Call Indicator Lamp goes off.
Speaker key lamp lights red.
Line key lamp lights green.
2. Press Soft key (>>>>) when Soft key is used.
3. Press Soft key (DND) or DND feature key.
4. Press Speaker key
Speaker key lamp goes off.
Line key lamp goes off.
TO CANCEL
1. Press Speaker key.
Call Indicator Lamp goes off.
Speaker key lamp lights red.
Line key lamp lights green.
2. Press Soft key (>>>>) when Soft key is used.
3. Press Soft key (DND) or DND feature key.
4. Press Speaker key
Speaker key lamp goes off.
Line key lamp goes off.
SAVE AND REPEAT A NUMBER
This feature allows a terminal to save a specific
dialed number and then redial that number.
This feature is set by Soft key or
feature key. The feature key is set by
system data setting at initial
installation. For details, please contact
the system administrator.
Up to three Save and Repeat feature
keys can be assigned per terminal.
TO SET SAVE AND REPEAT
1. Dial the desired number and press Soft key
(S&R) or Save and Repeat feature key
HOW TO DIAL BY SAVE AND REPEAT
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
Line key lamp lights green.
2. Press Save and Repeat feature key.
The terminal automatically redials the
programmed number.
Example: “201” is programmed number.
3. Lift the handset to start a conversation.
Speaker key lamp goes off.
Redialing the same number is possible
until new number is registered by this
feature.

NEC ITK-32LCG-1P Specifications

General

Brand	NEC
Model	ITK-32LCG-1P
Category	Telephone System
Language	English