APPENDIX B. INPUT CHARACTERS
APPENDIX B. INPUT CHARACTERS
HOW TO INPUT CHARACTERS (SYSTEM)
SYSTEM/STATION SPEED DIALING FEATURE
Press the dial key to display the character. The character will be changed by repeatedly pressing the
dial. After displaying the desired character, press “#” or right cursor key.
Example: When inputting with “MARY SMITH”,
6# 2# 777# 999# 0# 7777# 6# 444# 8# 44#
M A R Y S M I T H
The following two input mode can be specified.
ABC: English input mode.
NUM: Number input mode.
Input mode switches over by pressing “*” repeatedly, and also it can be switched by press local soft key 3 if
there is “Aa1” (“ABC” → “abc” → “NUM”).
Up to 4 characters can be entered for keyword searching.
Up to 16 characters can be registered for each name.
Up to 30 digits can be registered for each dial number.
(access code: up to 4 digits, called number: up to 26 digits)
The default setting is English input mode.
Please refer to CHARACTER CODE TABLE for the character that can be entered.
To Next Page
Loading...
