NEC ITK-32LCG-1P - Page 62

OPERATION
52
TO CALL
1. Refer to “TO SEARCH PERSON” and display the
person information to call.
2. Press Speaker key or Enter key to make a call.
You will receive a dial tone.
Speaker key lamp lights red.
Line key lamp lights green.
3. Lift the handset to start a conversation.
Speaker key lamp goes off.
TO REGISTER
Following explains how to register the called
party into the personal directory.
1. Refer to “TO START SYSTEM PHONEBOOK” and
display the search screen.
2. Press Personal.
3. Search the vacant area of directory.
Press up/down key or system soft key (↑
Prev) or (↓Next).
4. Register the information of the called party.
Press system soft key (ENTRY).
5. Press system soft key (NAME) and then input the
name.
6. Input the name data.
Up to 16 characters can be entered for
each name.
Please refer to “CHARACTER CODE
TABLE” for the character that can be
entered.
When returning to the previous screen,
press up key or system soft key
(CANCEL).
When erasing a character, press left key
or soft key (BK).
7. After input the name data, Press system soft key
(SET).
8. Press system soft key (NUMBER) to register the
dial number.
Up to 30 digits can be registered for each
dial number. (access code: up to 4 digits,
called number: up to 26 digits)