E-107
USING ON-SCREEN MENU
⬎
Menu Descriptions & Functions
Key1-4:
Enter encryption key when selecting [64bit] or [128bit] in [WEP].
Up to 5 characters can be set in 64 bit and up to 13 characters in 128
bit. Press the “HEX” button to change to “ASCII” to set the key in ASCII
digit. You can toggle this button between “ASCII” and “HEX”.
The key can also be set in hexadecimal digit.
* Hexadecimal uses 0 to 9 and A to F.
* Up to 10 characters can be set in 64 bit and up to 26 characters in
128 bit.
Mail
NOTE: To the Mail Alert feature on wireless LAN connection, select "Infrastruc-
ture" for "Mode" in "Network Type."
"Test Mail" is available only when there is a LAN card in the PC card slot of the
projector.
Alert Mail:
Checking this box enables Alert Mail feature.
This option notifies your computer of an error message via e-mail when
using wireless or wired LAN. The error message will be notified when
the projector lamp has reached the end of its usable life or an error
occurs in the projector.
To Next Page
Loading...
