E-125
Lens Protector
The lens barrel has threads on the outside for mounting a commercially
available lens protector (φ 62mm for LT260K and φ 72mm for LT240K) to
protect the lens from dirt, dust, scratches and damage. Note that both a
lens protector and the supplied lens cap cannot be used at the same time.
CAUTION: Use only transparent lens protectors designed for lens protec-
tion. Use of filters for light reduction and special effects, such as ND (Neu-
tral Density) filters and color filters, can absorb heat, resulting in damage
to the filter and the projector.
MAINTENANCE
To Next Page
Loading...
