Basic Operation
Operating range for the Remote Control
▪ Point the top of the remote control toward the monitor’s remote control sensor during button
operation.
▪ Use the remote control within a distance of about 3.5 m from the remote control sensor, or at a
horizontal and vertical angle of within 30° and within a distance of about 3.5 m.
NOTE: The remote control system may not function when direct sunlight or strong illumination strikes
the remote control sensor, or when there is an object in the path.
Handling the remote control
▪ Do not expose to strong shock.
▪ Do not allow water or other liquid to splash on the remote control. If the remote control gets wet,
wipe it dry immediately.
▪ Avoid exposure to heat and steam.
▪ Except to install the batteries, do not open the remote control.
To Next Page
Loading...
