Addendum to User’s Manuals of MultiSync M551 & M651
This user’s manual is an addendum to the standard user’s manual of the base model monitors M551
and M651.
All specifications listed here supersede those in the standard version of the manual included with this
monitor.
NOTE: Following feature sets are not supported by the Mxx1 IGB models:
- Table Top Stand Option: Other than the standard monitor, the M651 IGB model does not allow for
table top installations; For the M551 IGB the ST-43M table stand can be used.
- Room Light Sensing Sensor: Other than the standard monitor, the Mxx1 IGB models do not allow
the monitor to make automatic adjustments to the backlight setting.
- NEC ornament logo: Other than the standard monitor, the does not have an ornament logo.
Therefore changing the position of the NEC logo is not possible.
- USB (3) port: USB power supply cannot be used (5V – 2A) on the Mxx1 IGB models.
You can use USB Memory for internal Media Player. SDM and Compute Module’s USB have no
limitation.
3
To Next Page
Loading...
