Do you have a question about the NEC M282X and is the answer not in the manual?
Native aspect ratio | - |
---|---|
Projection distance | 0.9 - 15.97 m |
Vertical scan range | 50 - 120 Hz |
Horizontal scan range | 15 - 100 kHz |
Projection technology | DLP |
Contrast ratio (typical) | 10000:1 |
Screen size compatibility | 29.9 - 299.2 \ |
Projector native resolution | XGA (1024x768) |
Keystone correction, horizontal | +-30 ° |
Focus | Manual |
Zoom capability | Yes |
Focal length range | 17.09 - 29.05 mm |
Aperture range (F-F) | 2.4 - 3.1 |
Lamp power | 257 W |
Light source type | Lamp |
Lamp power (economic mode) | 187 W |
Service life of light source | 4500 h |
Service life of light source (economic mode) | 10000 h |
3D | No |
Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
Supported graphics resolutions | 1920 x 1200 (WUXGA) |
Composite video in | 1 |
USB connector type | USB Type-A, USB Type-B |
Serial interface type | RS-232 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Component video (YPbPr/YCbCr) in | 0 |
Noise level | 38 dB |
Certification | UL60950-1, CSA60950-1, FCC Part 15 Class B, ICES-03 Class B |
Noise level (economic mode) | 29 dB |
RMS rated power | 20 W |
Placement | Desktop, Ceiling |
Product type | Standard throw projector |
Product color | White |
Market positioning | Portable |
Power source | AC |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (standby) | 2.5 W |
Power consumption (PowerSave) | 0.2 W |
Storage temperature (T-T) | -10 - 50 °C |
Operating temperature (T-T) | 5 - 40 °C |
Operating relative humidity (H-H) | 20 - 80 % |
Remote control type | IR |
Depth | 280 mm |
---|---|
Width | 339 mm |
Height | 90 mm |
Weight | 3400 g |