4-7
3.6.3. Factory setting
1) Enter a signal input. (no prescribe)
2) Assume the FACTORY mode in the procedures of Paragraph 2.2.3 and display the SERVICE menu.
3) Press the NEXT key three times and advance to the tag |4|.
4) Use the (4) RIGHT or (3) LEFT keys and adjust the cursor to [OSD DESIGN],[OSM SELECT] and
[URL]. Set by pressing the (+) PLUS or (-) MINUS keys.
OSD DESIGN 0
OSM SELECT 0
URL 1
5) Press the EXIT key and withdraw from the SERVICE mode.
To Next Page
Loading...
