4-3
3. Default Setting
Item Condition
Power Supply AC100V~240V
Input Freq.
1280×1024@75Hz
BRIGHTNESS 100%
CONTRAST 50%
Color Temp. NATIVE
OSM TRUN OFF 45 sec.
OSM LOOK OUT NO
Resolution notifier ON
OFF TIMER OFF
OSD/OSM
SETTING
OSM
URL SETTING WWW.NECMITSUBISHI.COM
HOT KEY ON
OSM Setting
LANGUAGE ENGLISH
4. Basic Operation (Front Control Panel Layouts)
BUTTON MENU
(1) MENU/EXIT
Open OSM main menu. Exits the OSM controls.
Exits to the OSM main menu.
Left/Right
Moves the highlighted area left/right to select control
menus.
Moves the bar left/right to increase or decrease the
adjustment.
(2) 4 Direction Control Key
Down/Up
Moves the highlighted area down/up to select one of the
controls.
(3) SELECT/1 2 Active Auto Adjust function. Enter the OSM sub menu.
(4) RESET
Resets the highlighted control menu to the factory
setting.
(5) Power LED
Power LED, is green when monitor is on; amber when in
power saving mode.
(6) POWER Switch on/off monitor power.
(1)
(2) (3)
(4)
(5)
(6)
To Next Page
Loading...
Need help?
General