4-10
5.2.3 How to Exit Service Mode
Press the “EXIT” key to close OSM menu (Service mode).
If you turn off (power off) the monitor in the Service mode, it will exit the Service mode.
Likewise, if you unplug the power cord while in the Service mode, it will exit the Service mode.
5.2.4 Burn in Mode
The monitor can display color image without signal for aging.
Enter “Burn in mode” if Press “RESET” and “SELECT” key simultaneously when “No signal” OSM is shown.
Display Color can be changed by “Burn in mode” menu.
Exit “Burn in mode” by pressing “MENU/EXIT” or turning on video signal input or turning off “Monitor power”
that is hardware off or software off.
Default setting: White, Red, Green, Blue = 255
To Next Page
Loading...
