To Next Page

To Previous Page

English-26

KEEP PIP MODE* Allows the monitor to remain in “PIP” mode after powering off. When Power is returned, OFF

PIP appears without having to enter the OSD.

PIP MODE* Picture-in-Picture OFF

OFF OFF

PIP PIP

POP POP

SIDE BY SIDE (ASPECT)

SIDE BY SIDE ASPECT

SIDE BY SIDE (FULL) SIDE BY SIDE FULL

PIP SIZE Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode. LARGE

SMALL

MIDDLE

LARGE

PIP POSITION Determines where the PIP appears on the screen. X = 95, Y = 92

TEXT TICKER Allow text insertion within main screen. OFF

PIP RESET Resets PIP options back to factory settings. -

LANGUAGE Select the language used by the OSD. English

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

SVENSKA

Русский

OSD TURN OFF Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds. 30 Sec.

OSD POSITION Determines the location where the OSD appears on the screen.

X = 128, Y = 225

DOWN

LEFT

RIGHT

INFORMATION OSD Selects whether the information OSD is displayed or not. The information OSD will be ON, 3 Sec.

displayed when the input signal or source changes. The information OSD will also give a

warning when there is no-signal or the signal is out-of range.

An interval between 3 to 10 seconds for the Information OSD to appear is available.

MONITOR INFORMATION Monitor Information. -

OSD TRANSPARENCY Set the transparency level of the OSD. TYPE2

OFF

TYPE1

TYPE2

OSD RESET Resets the following settings within the OSD menu back to factory setting: -

OSD TURN OFF, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY.

*: The product you purchased may not have this feature.

PIP

OSD

Other manuals for NEC MultiSync LCD4020

Technical Specification2 pages

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync LCD4020 and is the answer not in the manual?

NEC MultiSync LCD4020 Specifications

General

Pixel pitch	0.648 x 0.648 mm
Response time	8 ms
Display diagonal	40 \
Display brightness	500 cd/m²
Vertical scan range	50 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
Display number of colors	16.78 million colors
Aspect ratio	16:9
Display sRGB	Yes
Built-in camera	No
Headphone connectivity	3.5 mm
DVI-D ports quantity	1
Product color	Black
Product design	Digital signage flat panel
Panel mounting interface	600 x 200 mm
Power consumption (typical)	300 W
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	CE; TÜV GS; C-tick; FCC Class B; UL/C-UL or CSA; CCC; PSB; VCCI; RoHS
Cables included	AC, VGA